Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
137
Mellanox Technologies Confidential
Step 6. Install the new image.
Step 7. Have the new image activate during the next boot. Run:
Step 8. Run show images to review your images. Run:
Boot manager password is set.
No image install currently in progress.
Require trusted signature in image being installed: yes (default)
switch (config) #
switch (config) # image install <image_name>
Step 1 of 4: Verify Image
100.0% [#############################################################]
Step 2 of 4: Uncompress Image
100.0% [#############################################################]
Step 3 of 4: Create Filesystems
100.0% [#############################################################]
Step 4 of 4: Extract Image
100.0% [#############################################################]
switch (config) #
CPU utilization may go up to 100% during image upgrade.
switch (config) # image boot next
switch (config) # show images
Images available to be installed:
new_image.img
SX <new ver> 2011-04-28 16:52:50
Installed images:
Partition 1:
SX <old ver> 2011-04-28 16:02:50
Partition 2:
SX <new ver> 2011-04-28 16:52:50
Last boot partition: 1
Next boot partition: 2
No boot manager password is set.
switch (config) #