Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
140
Mellanox Technologies Confidential
Step 6. Delete all previous images from the Images available to be installed prior to fetching
the new image. Run:
Step 7. Fetch the requested software image. Run:
4.3.3.2 Downgrading Image
Step 1. Log in as admin.
Step 2. Enter config mode. Run:
Step 3. Show all image files on the system. Run:
Step 4. Install the MLNX-OS image. Run:
switch (config) # image delete image-EFM_PPC_M405EX-ppc-m405ex 20090531-190132.img
switch (config) # image fetch scp://username:password@192.168.10.125/var/www/html/
<image_name>
100.0%[################################################## ###############]
The procedure below assumes that booting and running is done from Partition 1 and the
downgrade procedure is performed on Partition 2.
switch > enable
switch # configure terminal
switch (config) # show images
Images available to be installed:
new_image.img
<downgrade version> 2010-09-19 16:52:50
Installed images:
Partition 1:
<current version> 2010-09-19 03:46:25
Partition 2:
<current version> 2010-09-19 03:46:25
Last boot partition: 1
Next boot partition: 1
No boot manager password is set.
switch (config) #
switch (config) # image install <image_name>
Step 1 of 4: Verify Image
100.0% [#################################################################]
Step 2 of 4: Uncompress Image
100.0% [#################################################################]
Step 3 of 4: Create Filesystems
100.0% [#################################################################]
Step 4 of 4: Extract Image
100.0% [#################################################################]
switch (config) #