Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
143
Mellanox Technologies Confidential
Default Firmware Change on Standalone Systems
Step 1. Import the firmware image (.tgz file). Run:
Step 2. Save the configuration. Run:
Step 3. Reboot the system to enable auto update.
Step 4.
switch (config) # image fetch
switch (config) # image default-chip-fw fw-SX-rel-9_1_2090.tgz
Default Firmware 9.1.2090 updated. Please save configuration and reboot for new FW to
take effect.
switch (config) #
switch (config) # configuration write
switch (config) #