Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10

Mellanox Technologies

Mellanox Technologies Confidential

Step 5. Once you get the prompt, you are ready to use the system.

2.3 Starting the Web User Interface

 To start a WebUI connection to the switch platform:

Step 1. Set up an Ethernet connection between the switch and a local network machine using a stan-

dard RJ-45 connector.

Step 2. Open a web browser – Internet Explorer 7.0 Chrome or Mozilla Firefox 3.0.

Note: Make sure the screen resolution is set to 1024*768 or higher.

Step 3. Type in the IP address of the switch or its DNS name in the format: http://

<switch_IP_address>.

Step 4. Login to the switch (default user name is admin, password admin).

Figure 2: MLNX-OS Login Window

Mellanox MLNX-OS Switch Management

Password:

Last login: <time> from <ip-address>

Mellanox Switch

Please read and accept the Mellanox End User License Agreement located at:

http://www.mellanox.com/related-docs/prod_management_software/MLNX-OS_EULA.pdf

switch >