Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
216
Mellanox Technologies Confidential
show debug ethernet
show debug ethernet {dcbx | ip {arp | dhcp-relay | igmp-snooping | interface |
ospf} | lacp | lldp | port | qos | spanning-tree | vlan}
Displays debug level configuration on a specific switch.
Syntax Description dcbx Displays the trace level for spanning tree.
ip Displays debug trace level for ethernet routing module.
•arp
• dhcp-relay
• igmp-snooping
•interface
•ospf
lacp Displays the trace level for LACP.
lldp Displays the trace level for LLDP.
port Displays the trace level for port.
qos Displays the trace level for QoS.
spanning-tree Displays the trace level for spanning tree.
vlan Displays the trace level for VLAN.
Default N/A
Configuration Mode Any Command Mode
History 3.3.4150
Role admin
Example
switch (config) # show debug ethernet dcbx
dcbx protocol :
management is ON
fail-all is ON
control-panel is ON
tlv is ON
switch (config) #
Related Commands
Note