Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
270
Mellanox Technologies Confidential
ldap host
ldap host <IP Address> [order <number> last]
no ldap host <IP Address>
Adds an LDAP server to the set of servers used for authentication.
The no form of the command deletes the LDAP host.
Syntax Description IP Address IPv4 or IPv6 address.
number The order of the LDAP server.
last The LDAP server will be added in the last location.
Default No hosts configured
Configuration Mode Config
History 3.1.0000
Role admin
Example
switch (config) # ldap host 10.10.10.10
switch (config) # show ldap
User base DN : ou=department,dc=example,dc=com
User search scope : subtree
Login attribute : sAMAccountName
Bind DN : my-dn
Bind password : my-password
Group base DN : my-group-dn
Group attribute : member
LDAP version : 3
Referrals : yes
Server port : 389
Search Timeout : 5
Bind Timeout : 5
SSL mode : none
Server SSL port : 636 (not active)
SSL cert verify : yes
LDAP servers:
1: 10.10.10.10
2: 10.10.10.12
switch (config) #
Related Commands show aaa
show ldap
Note
• The system will select the LDAP host to try according to its order
• New servers are by default added at the end of the list of servers