Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
309
Mellanox Technologies Confidential
stats chd <chd-id> compute time
stats chd <CHD ID> compute time {interval | range} <number of seconds>
Sets parameters for when this CHD is computed.
Syntax Description CHD ID Possible IDs:
• cpu_util - CPU utilization: percentage of time spent
• cpu_util_ave - CPU utilization average: percentage of
time spent
• cpu_util_day - CPU utilization average: percentage of
time spent
• disk_device_io_hour - Storage device I/O read/write sta-
tistics for the last hour: bytes
• disk_io - Operating system aggregate disk I/O average:
KB/sec
• eth_day
• eth_hour
• fs_mnt_day - Filesystem system usage average: bytes
• fs_mnt_month - Filesystem system usage average: bytes
• fs_mnt_week - Filesystem system usage average: bytes
• ib_day
• ib_hour
• intf_day - Network interface statistics aggregation: bytes
• intf_hour - Network interface statistics (same as “inter-
face” sample)
• intf_util - Aggregate network utilization across all inter-
faces
• memory_day - Average physical memory usage: bytes
• memory_pct - Average physical memory usage
• paging - Paging activity: page faults
• paging_day - Paging activity: page faults
interval Specifies calculation interval (how often to do a new
calculation) in number of seconds.
range Specifies calculation range, in number of seconds.
number of seconds Number of seconds.
Default Different per CHD
Configuration Mode Config
History 3.1.0000
Role monitor/admin
Example
switch (config) # stats chd memory_day compute time interval 120
switch (config) # show stats chd memory_day
CHD "memory_day" (Average physical memory usage: bytes):
Source dataset: sample "memory"
Computation basis: time
Interval: 120 second(s)
Range: 1800 second(s)
switch (config) #