Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10

Mellanox Technologies

Mellanox Technologies Confidential

3.2.1 Setup Menu

The Setup menu makes available the following submenus (listed in order of appearance from top

to bottom):

Table 14 - Setup Submenus

Submenu Title Description

Interfaces Used to obtain the status of, configure, or disable interfaces to the InfiniBand

fabric. Thus, you can: set or clear the IP address and netmask of an interface;

enable DHCP to dynamically assign the IP address and netmask; and set inter-

face attributes such as MTU,

speed, duplex, etc.

HA Not

functional.

Routing Used to set, remove or display the default gateway, and the static and dynamic

routes.

Hostn

ame Used to set or modify the hostname.

Used to set or delete static hosts.

DNS Used to set, remove, modify or display static and dynamic name servers.

Day (MOTD), Remote Login

message, and Local Login message.

ARP Used to add static and dynamic ARP entries, and to clear

the dynamic ARP

cache.

IPSec Used to configure IPSec feature.

Neighbors Used to display IPv6 neighbor discovery protocol.

Virtual Switch Mgmt Used to set the system profile.

Web Used to configure Web user interface and

proxy settings.

SNMP Used to configure SNMP attributes, SNMP admin user,

and trap sinks.

Email Alerts Used to define the destination of email alerts and the recipien

ts to be notified.

XML gateway Provides an XML request-response protocol to get and set hardware manage-

ment information.

Logs Used to set up system log files, remote log sinks, and log formats.

Configurations Used to manage, activate, save, and import MLNX-OS SwitchX configuration

files, and to

execute CLI commands.

Date and Time Used to set the date, time, and time zone of the switch system.

NTP Used to set NTP (Network Time Protocol) and NTP servers.

Licensing Used to manage MLNX-OS licenses.