Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
350
Mellanox Technologies Confidential
4.13.3 Commands
4.13.3.1 SNMP
The commands in this section are used to manage th
e SNMP server.
Configures SNMPD refresh settings.
The no form of the command disables SNMPD refresh mechanism.
enable Enables
SNMPD refresh mechanism.
interval Sets SNMPD refresh interval.
Enabled.
Interval: 60 secs
Config
3.1.0000
admin
switch(config) # snmp-server community private rw
switch (config) # show snmp
SNMP enabled: yes
SNMP port: 161
System contact:
System location:
Read-only community: public
Read-write community: private
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled: yes
Default trap community: public
Default trap port: 162
No trap sinks configured.
switch(config) #
show snmp
•
snmp-server auto-refresh
snmp-server auto-refresh {enable | interval}
no snmp-server auto-refresh enable
Syntax Description
Default
Configuration Mode
History
Role
Example
Related Commands
Note