Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
39
Mellanox Technologies Confidential
The Fabric Inspctr menu makes available the following sub-menus (listed in order of appear-
ance from top to bottom):
Table 20 - Fabric Inspctr Submenus
Submenu Title Description
Summary Displays a fabric status summary, including the time of last fabric update, what
systems are in the fabric, what InfiniBand devices are identified, etc.
IB Systems Displays information about all
identified InfiniBand systems in the fabric (adapt-
ers, switches, etc).
IB Nodes Displays information about InfiniBand nodes in the fabric. It is possible to filter
display by th
e type of InfiniBand node (HCA adapter, switch, etc).
IB Ports Displays all active InfiniBand ports in the fabric. It is possible to filter display by
th
e type of InfiniBand port (HCA port, switch port, switch management port,
etc), by the port rate (speed or width), by the Subnet Manager status on the node,
by node traffic, etc.
Connections Displays all active connections in the fabric. It
is possible to filter display by the
link type (switch to switch, switch to HCA, etc) and by the link rate (speed or
width).
System Names Allows the mapping of System Names to GUIDs to ease system identification.
3.2.8 ETH Mgmt
The ETH Mgmt menu makes available the following sub-menus (listed in order of appearance
from top to bottom):
Table 21 - ETH Mgmt Submenus
Submenu Title Description
Spanning Tree Used for configuring and monitoring spanning tree protocol.
MAC Table Used for configuring static mac addresses in
the switch, and displaying the mac
address table.
Link Aggregation Used for configuring and monitoring aggregated Ethernet
links (LAG) as well as
configuring LACP.
VLAN Used for managing the switch VLAN table.
IGMP Snooping Used for managing IGMP snooping in the switch.
ACL Used for managing Access Control in the switch.
The Eth Mgmt menu is not applicable when the switch profile is not ethernet.