Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
394
Mellanox Technologies Confidential
show interfaces ethernet
show interfaces ethernet <inf> [counters [priority]]
Displays the configuration and status for the interface.
Syntax Description inf Interface number: <slot>/<port>.
counters Displays interface extended counters.
priority Displays interface extended counters, per priority (0-7).
Default N/A
Configuration Mode Any Command Mode
History 3.1.0000
Role admin
Example
switch (config) # show interfaces ethernet 1/1
Eth1/1
Admin state: Enabled
Operational state: Up
Description: N\A
Mac address: 00:02:c9:71:ed:2d
MTU: 1500 bytes(Maximum packet size 1522 bytes)
Flow-control: receive off send off
Actual speed: 40 Gbps
Width reduction mode: Not supported
Switchport mode: access
Last clearing of "show interface" counters 00:20:39
60 seconds Ingress rate: 0 bits/sec, 0 bytes/sec, 0 packets/sec
60 seconds Egress rate: 0 bits/sec, 0 bytes/sec, 0 packets/sec
Rx
0 packets
0 unicast packets
0 multicast packets
0 broadcast packets
0 bytes
0 error packets
0 discard packets
Tx
63 packets
0 unicast packets
63 multicast packets
0 broadcast packets
4032 bytes
0 discard packets
switch (config) #
Related Commands
Note