Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
401
Mellanox Technologies Confidential
Step 4. Change back to config mode. Run:
Step 5. Enable LACP in the switch. Run:
Step 6. Add a physical port to the port-channel. Run:
5.2.3 Commands
Creates a port channel and enters the port-channel configuration mode. There is an
option to create a range of port-channel interfaces.
The no form of the command deletes the port-channels, or range of port-channels.
1-4096 / 2-4096 Port channel number.
Port channels are not created by default.
Config
3.1.1400 Initial version.
3.2.1100 Added range support.
admin
switch (config)# interface port-channel 1
switch (config interface port-channel 1) # exit
switch (config)# interface port-channel 1-10
switch (config interface port-channel 1-10) #
switch (config interface port-channel 1) # exit
switch (config) #
switch (config) # lacp
switch (config) #
switch (config interface ethernet 1/4) # channel-group 1 mode active/passive
switch (config interface ethernet 1/4) #
interface port-channel
interface port-channel <1-4096>[-<2-4096>]
no interface port-channel <1-4096>[-<2-4096>]
Syntax Description
Default
Configuration Mode
History
Role
Example
Related Commands
Note