Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
412
Mellanox Technologies Confidential
5.3 VLANs
show interfaces port-channel
show interfaces port-channel {compatibility-parameters | load-balance | sum-
mary}
Displays port-channel parameters.
Syntax Description compatibility-parameters Displays the parameters that must be the same among
the member ports of the port-channel interface.
load-balance Displays the type of load-balancing in use for port-
channels.
summary Displays a summary of the port-channel interfaces.
Default N/A
Configuration Mode Any Command Mode
History 3.3.4000
Role admin
Example
switch (config) # show interfaces port-channel compatibility-parameters
* Port-mode
* Speed
* MTU
* Flow Control
* Access VLAN
* Allowed VLAN list
* Flowcontrol & PFC
* Channel-group mode
* CoS parameters
Static configuration on the port should be removed:
* ACL port binding
* Static mrouter
* Static mac address
switch (config) #show interfaces port-channel load-balance
source-destination-mac
switch (config) #show interfaces port-channel summary
Flags: D- Down P - Up in port-channel (members)
I - Individual H - Hot-standby (LACP only)
s - Suspended r - Module-removed
U - Up (port-channel)
-----------------------------------------------------------------------
Group Port- Type Member Ports
Channel
-----------------------------------------------------------------------
switch (config) #
Related Commands
Note