Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
423
Mellanox Technologies Confidential
5.4 MAC Address Table
5.4.1 Configuring Unicast Static MAC Address
You can configure static MAC addresses for unicast traffic. This feature improves security and
reduces unknown unicast flooding.
 To configure Unicast Static MAC address:
Step 1. Log in as admin.
Step 2. Enter config mode. Run:
Step 3. Run the command mac-address-table static unicast <destination mac address> vlan <vlan
identifier(1-4094)> interface ethernet <slot>/ <port>
.
switch > enable
switch # configure terminal
switch (config) # mac-address-table static unicast 00:11:22:33:44:55 vlan 1 interface
ethernet 0/1