Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
502
Mellanox Technologies Confidential
Step 5. Run the command show dcb ets to verify the configuration.
Traffic class priorities are <0-3>, where 0 is the lowest and 3 is the highest.
The sum of all traffic class bandwidth value (in percentage) should be 100, otherwise
the command fails.
switch (config) # show dcb ets
ETS enabled
TC Bandwidth
--------------------------
0 30%
1 30%
2 10%
3 30%
Number of Traffic Class: 4
switch (config) #