Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch
Rev 2.10
Mellanox Technologies
7
Mellanox Technologies Confidential
Document Revision History
Table 1 - Document Revision History
Document
Revision
Date Description
Rev 2.10 December, 2013 Updated:
• Section 2.2, “Starting the Command Line (CLI),” on page 19
• Section 2.3, “Starting the Web User Interface,” on page 20
• Section 4.3.1, “Upgrading MLNX-OS Software,” on page 135 with
EULA note
• Section 4.14, “Puppet Agent,” on page 365
• Section 5.6, “OpenFlow,” on page 453
• the command “openflow description” on page 456
• the command “show openflow” on page 461
• the command “deny/permit (IPv4 ACL rule)” on page 518
• the command “load-interval” on page 392 with Config Interface Port
Channel
• the command “switchport {hybrid, trunk} allowed-vlan” on page 421
with Config Interface Port Channel
• the command “spanning-tree port-priority” on page 436 with Config
Interface Port Channel
• the command “spanning-tree cost” on page 437 with Config Interface
Port Channel
• the command “spanning-tree port type” on page 438 with Config Inter-
face Port Channel
• the command “spanning-tree guard” on page 439 with Config Inter-
face Port Channel
• the command “spanning-tree bpdufilter” on page 440 with Config
Interface Port Channel
• the command “sflow enable (interface)” on page 553 with Config
Interface Port Channel
Added:
• Section 4.12.2.1, “Width Reduction Power Saving,” on page 319
Rev 2.00 December 2013 Added Section 5.1.2, “Transceiver Information,” on page 385
Added the command “run-interval” on page 378
Updated Section 4.3.1, “Upgrading MLNX-OS Software,” on
page 135
Updated Section 4.3.2, “Deleting Unused Images,” on page 138
Updated Section 4.6, “Debugging,” on page 203
Updated “Notification Indicator” column in Section 8.3.2, “Con-
figuring Proxy-ARP,” on page 869
Updated the command “show puppet-agent” on page 380
Updated the command Section ,“lldp tlv-select,” on page 489
Moved Section 3.3, “Secure Shell (SSH),” on page 40 from 4.13.2
Removed mention of the MLNX-OS Command Reference Guide
Removed the command “lldp tlv-select dcbx”
Rev 1.90 November 2013 Added Appendix A,“MEX6200 System,” on page 893