Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10

Mellanox Technologies

Mellanox Technologies Confidential

web https

web https {certificate {regenerate | name | default-cert} | enable | port <port

number>}

no web https {enable | port <port number>}

Configures HTTPS access to the web-based management console.

The no form of the command negates HTTPS settings for the web-based management

console.

Syntax Description certificate regenerate Re-generates certificate to use for HTTPS connections.

certificate name Configure the named certificate to be used for HTTPS

connections

certificate default-cert Configure HTTPS to use the configured default certifi-

cate

enable Enables HTTPS access to the web-based management

console.

port Sets a TCP port for HTTPS access.

Default HTTPS is enabled

Default port is 443

Configuration Mode Config

History 3.1.0000

Role admin

Example

switch (config) # web https enable

switch (config) # show web

Web-based management console enabled: yes

HTTP enabled: yes

HTTP port: 80

HTTP redirect to HTTPS: no

HTTPS enabled: yes

HTTPS port: 443

Listen enabled: yes

No Listen Interfaces.

Inactivity timeout: 1 hr

Session timeout: 2 hr 30 min

Session renewal: 30 min

Web proxy enabled: yes

Proxy address: 10.10.10.10

Proxy port: 1080

Authentication type: basic

Basic auth username: web-user

Basic auth password: web-password

switch (config) #