Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
85
Mellanox Technologies Confidential
.
interface vlan create
interface vlan <id> create
no interface vlan <id> create
Creates an in-band management interface.
The no form of the command deletes the in-band management interface.
Syntax Description id VLAN ID. Range is 1-4094.
Default N/A
Configuration Mode Config
History 3.3.3500
Role admin
Example
switch (config) # interface vlan 10 create
switch (config) #
Related Commands interface
show interfaces <ifname>
Note
• This command does not requires any license
• If IP Proxy-ARP or IP Routing is enabled, the interface cannot be created
• No more than 60 in-band management interfaces can be created
• All management interface commands are applicable under this interface (ip address, mtu,
dhcp, shutdown, zeroconf …)
• To enter the interface VLAN configuration mode you need to use the command “interface
vlan<id>” (e.g. interface vlan10)