Mellanox MLNX-OS® User Manualfor SX1018HP Ethernet Managed Blade Switch

Rev 1.6.9

Mellanox Technologies

Mellanox Technologies Confidential

2. Disable paging of CLI output. Run:

3. Display commands to recreate current running configuration. Run:

4. Copy the output to a text file.

4.2.3.1 Downloading Image

Step 1. Log into the system to obtain the serial number. Run:

Step 2. Download the requested MLNX-OS version from the following link:

http://support.mellanox.com/SupportWeb/

Step 3. Enter your username and password when prompted.

Step 4. Log into the switch via the CLI using the console port.

Step 5. Change to Config mode. Run:

Step 6. Delete all previous images from the Images available to be installed prior to fetching

the new image. Run:

Step 7. Fetch the requested software image. Run:

4.2.3.2 Downgrading Image

Step 1. Log in as admin.

Step 2. Enter config mode. Run:

Step 3. Show all image files on the system. Run:

switch-112094 [standalone: master] (config) # no cli default paging enable

switch-112094 [standalone: master] (config) # show running-config

switch-112094 [standalone: master] (config) # show inventory

switch > enable

switch # configure terminal

switch (config) #

switch (config) # image delete image-EFM_PPC_M405EX-ppc-m405ex 20090531-190132.img

switch (config) # image fetch scp://username:password@192.168.10.125/var/www/html/

<image_name>

100.0%[################################################## ###############]

The procedure below assumes that booting and running is done from Partition 1 and the

downgrade procedure is performed on Partition 2.

switch > enable

switch # configure terminal

switch (config) # show images

Images available to be installed:

new_image.img

<downgrade version> 2010-09-19 16:52:50

Installed images: