Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
116
logging receive
logging receive
no logging receive
Enables receiving logging messages from a remote host.
The no form of the command disables the option of receiving logging messages from
a remote host.
Syntax Description N/A
Default Receiving logging is disabled
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # logging receive
switch (config) # show logging
Local logging level: info
Default remote logging level: notice
No remote syslog servers configured.
Allow receiving of messages from remote hosts: yes
Number of archived log files to keep: 10
Log rotation size threshold: 5.000% of partition (43 megabytes)
Log format: standard
Subsecond timestamp field: disabled
Levels at which messages are logged:
CLI commands: notice
Audit messages: notice
switch (config) #
Related Commands show logging
logging local
logging local override
Note
• This does not log to the console TTY port
• Inband management should be enabled in order to open a channel from the host to the CPU
• If enabled, only log messages matching or exceeding the minimum severity specified with
the “logging local” command will be logged, regardless of what is sent from the remote
host