Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
192
ssh server ports
ssh server ports {<port1> [<port2>...]}
Specifies which ports the SSH server listens on.
Syntax Description port Port number in [1...65535].
Default 22.
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # ssh server ports 22
switch (config) # show ssh server
SSH server configuration:
SSH server enabled: yes
Minimum protocol version: 2
X11 forwarding enabled: no
SSH server ports: 22
Interface listen enabled: yes
No Listen Interfaces.
Host Key Finger Prints:
RSA v1 host key: a0:63:db:96:e2:95:5a:5a:fd:a8:d0:f4:ab:e3:5f:f8
RSA v2 host key: 1e:b7:8b:ec:ab:35:98:be:6b:d6:12:c2:18:72:12:d6
DSA v2 host key: 7c:4a:f7:72:51:67:b5:0b:cd:a2:d2:b9:f3:be:3e:68
switch (config) #
Related Commands show ssh server
Note
• Multiple ports can be specified by repeating the <port> parameter
• The command will remove any previous ports if not listed in the command