Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
216
web proxy host
web proxy host <IP address> [port <port number>]
no web proxy
Adds and enables a proxy to be used for any HTTP or FTP downloads.
The no form of the command disables the web proxy.
Syntax Description IP address IPv4 or IPv6 address.
port number Sets the web proxy default port.
Default 1080
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # web proxy host 10.10.10.10 port 1080
switch (config) # show web
Web-based management console enabled: yes
HTTP enabled: yes
HTTP port: 80
HTTP redirect to HTTPS: no
HTTPS enabled: yes
HTTPS port: 443
Listen enabled: yes
No Listen Interfaces.
Inactivity timeout: 1 hr
Session timeout: 2 hr 30 min
Session renewal: 30 min
Web proxy enabled: yes
Proxy address: 10.10.10.10
Proxy port: 1080
Authentication type: basic
Basic auth username: web-user
Basic auth password: web-password
switch (config) #
Related Commands web proxy auth
Note