Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
219
snmp-server contact
snmp-server contact <contact name>
no snmp-server contact
Sets a value for the sysContact variable in MIB-II.
The no form of the command resets the parameter to its default value.
Syntax Description contact name Contact name.
Default “”
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # snmp-server contact my-name
switch (config) # show snmp
SNMP enabled: yes
SNMP port: 161
System contact: my-name
System location:
Read-only community: public
Read-write community: private
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled: yes
Default trap community: public
Default trap port: 162
No trap sinks configured.
switch (config) #
Related Commands show snmp
Note