Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
224
snmp-server location
snmp-server location <system location>
no snmp-server location
Sets a value for the sysLocation variable in MIB-II.
The no form of the command clears the contents of the sysLocation variable.
Syntax Description system location String.
Default “”
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # snmp-server location lab
switch (config) # show snmp
SNMP enabled: yes
SNMP port: 161
System contact: my-name
System location: lab
Read-only community: public
Read-write community: private
Interface listen enabled: yes
No Listen Interfaces.
Traps enabled: yes
Default trap community: public
Default trap port: 162
No trap sinks configured.
switch (config) #
Related Commands show snmp
Note