Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
24
2 System Management
2.1 Management Interfaces
2.1.1 Interface
This chapter describes the commands should be used to configure and monitor the management
interface.
interface
interface {mgmt0 | mgmt1 | lo}
Enters a management interface context.
Syntax Description mgmt0 Management port 0 (out of band).
mgmt1 Management port 1 (out of band).
lo Loopback interface.
ib0 IP over IB in-band management, relevant only for
InfiniBand switch systems.
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # interface mgmt0
switch (config interface mgmt0) #
Related Commands show interfaces <ifname>
Note