Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
241
email autosupport ssl mode
email autosupport ssl mode {none | tls | tls-none}
no email autosupport ssl mode
Configures type of security to use for auto-support email.
The no form of the command resets auto-support email security mode to its default.
Syntax Description none Does not use TLS to secure auto-support email.
tls Uses TLS over the default server port to secure auto-
support email and does not send an email if TLS fails.
tls-none Attempts TLS over the default server port to secure
auto-support email, and falls back on plaintext if this
fails.
Default tls-none
Modes/Context Config
History 3.2.3000
Role admin
Example
switch (config) # email autosupport ssl mode tls
Related Commands N/A
Note