Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2

Mellanox Technologies

258

stats alarm <alarm-id> enable

no stats alarm <alarm-id> enable

Enables the alarm.

The no form of the command disables the alarm, notifications will not be received.

Syntax Description alarm ID Alarms supported by the system, for example:

• cpu_util_indiv - Average CPU utilization too high: per-

cent utilization

• disk_io - Operating System Disk I/O per second too high:

kilobytes per second

• fs_mnt - Free filesystem space too low: percent of disk

space free

• intf_util - Network utilization too high: bytes per second

• memory_pct_used - Too much memory in use: percent of

physical memory used

• paging - Paging activity too high: page faults

• temperature - Temperature is too high: degrees

Default The default is different per alarm-id

Modes/Context Config

History 3.1.0000

Role admin

Example

switch (config) # stats alarm cpu_util_indiv enable

switch (config) #

Related Commands show stats alarm

Note