Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
261
stats alarm <alarm-id> rate-limit
stats alarm <alarm ID> rate-limit {count <count-type> <count> | reset | window
<window-type> <duration>}
Configures alarms rate limit.
Syntax Description alarm ID Alarms supported by the system, for example:
• cpu_util_indiv - Average CPU utilization too high: per-
cent utilization
• disk_io - Operating System Disk I/O per second too high:
kilobytes per second
• fs_mnt - Free filesystem space too low: percent of disk
space free
• intf_util - Network utilization too high: bytes per second
• memory_pct_used - Too much memory in use: percent of
physical memory used
• paging - Paging activity too high: page faults
• temperature - Temperature is too high: degrees
count-type Long medium, or short count (number of alarms).
reset Set the count and window durations to default values
for this alarm.
window-type Long medium, or short count, in seconds.
Default Short window: 5 alarms in 1 hour
Medium window: 20 alarms in 1 day
Long window: 50 alarms in 7 days
Modes/Context Config
History 3.1.0000
Role monitor/admin
Example
switch (config) # stats alarm paging rate-limit window long 2000
switch (config) #
Related Commands show stats alarm
Note