Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
271
show stats alarm
show stats alarm [<Alarm ID> [rate-limit]]
Displays status of all alarms or the specified alarm.
Syntax Description Alarm ID May be:
• cpu_util_indiv - Average CPU utilization too high: per-
cent utilization
• disk_io - Operating System Disk I/O per second too high:
kilobytes per second
• fs_mnt - Free filesystem space too low: percent of disk
space free
• intf_util - Network utilization too high: bytes per second
• memory_pct_used - Too much memory in use: percent of
physical memory used
• paging - Paging activity too high: page faults
• temperature - Temperature is too high: degrees
rate-limit Displays rate limit parameters.
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # show stats alarm
Alarm cpu_util_indiv (Average CPU utilization too high): ok
Alarm disk_io (Operating System Disk I/O per second too high): (dis-
abled)
Alarm fs_mnt (Free filesystem space too low): ok
Alarm intf_util (Network utilization too high): (disabled)
Alarm memory_pct_used (Too much memory in use): (disabled)
Alarm paging (Paging activity too high): ok
Alarm temperature (Temperature is too high): ok
switch (config) #
Related Commands stats alarm
Note