Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2

Mellanox Technologies

mtu

mtu <bytes>

no mtu <bytes>

Sets the Maximum Transmission Unit (MTU) of this interface.

The no form of the command resets the MTU to its default.

Syntax Description bytes The entry range is 68-1500.

Default 1500

Modes/Context Config Interface Management

History 3.1.0000

Role admin

Example

switch (config interface mgmt0) # mtu 1500

switch (config interface mgmt0) # show interfaces mgmt0

Interface mgmt0 state

Admin up: yes

Link up: yes

IP address: 172.30.2.2

Netmask: 255.255.0.0

Secondary address: 9.9.9.9/32 (alias: 'mgmt0:2')

IPv6 enabled: yes

Autoconf enabled: no

Autoconf route: yes

Autoconf privacy: no

IPv6 addresses: 1

IPv6 address: fe80::202:c9ff:fe5e:a5d8/64

Speed: 1000Mb/s (auto)

Duplex: full (auto)

Interface type: ethernet

Interface ifindex: 2

Interface source: physical

MTU: 1500

HW address: 00:02:C9:5E:A5:D8

Comment:

RX bytes: 2970074221 TX bytes: 468579522

RX packets: 44983023 TX packets: 1390539

RX mcast packets: 0 TX discards: 0

RX discards: 0 TX errors: 0

RX errors: 0 TX overruns: 0

RX overruns: 0 TX carrier: 0

RX frame: 0 TX collisions: 0

TX queue len: 1000

switch (config interface mgmt0) #

Related Commands show interfaces <ifname>

Note