Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
302
speed
speed <port speed> [force]
no speed
Sets the speed of the interface.
The no form of the command sets the speed of the interface to its default value.
Syntax Description port speed 1000 - 1Gbps
10000 - 10Gbps
40000 - 40Gbps
56000 - 56Gbps
force force changing the speed.
Default Depends on the port module type, see “Notes” section below.
Modes/Context Config interface ethernet
History 3.1.0000
Role admin
Example
switch (config interface ethernet 1/1) # speed 40000
switch (config interface ethernet 1/1) #
Related Commands show interface ethernet
Note
• 56Gbps port speed requires a license (LIC-6036F-56GE)
• The default speed depends on the interface capabilities, interface capable with 40Gbps will
have 40Gbps speed by default
• Not all interfaces support all speed options