Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
304
show interfaces ethernet
show interfaces ethernet <inf> [counters [priority]]
Displays the configuration and status for the interface.
Syntax Description inf Interface number: <slot>/<port>.
counters Displays interface extended counters.
priority Displays interface extended counters, per priority (0-7).
Default N/A
Modes/Context Any Command Mode
History 3.1.0000
Role admin
Example
switch (config) # show interfaces ethernet 1/5
Eth1/5
Admin state: Enabled
Operational state: Down
Description: N\A
Mac address: 00:02:c9:5d:e0:26
MTU: 1522 bytes
Flow-control: receive off send off
Actual speed: 40 Gbps
Switchport mode: access
Rx
0 frames
0 unicast frames
0 multicast frames
0 broadcast frames
0 octets
0 error frames
0 discard frames
Tx
0 frames
0 unicast frames
0 multicast frames
0 broadcast frames
0 octets
0 discard frames
switch (config) #
Related Commands
Note