Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
308
3.1.1 Brake-out cables
show interfaces ethernet [<inf>] transceiver
show interfaces ethernet [<inf>] transceiver
Displays the transceiver info.
Syntax Description inf interface number: <slot>/<port>
Default N/A
Modes/Context Any Command Mode
History 3.1.0000
Role admin
Example
switch (config) # show interfaces ethernet 1/1 transceiver
Port 1/1 state
identifier : QSFP+
cable/ module type : Optical cable/ module
ethernet speed and type: 40GBASE - SR4
vendor : Mellanox
cable_length : 50 m
part number : MC2210411-SR4
revision : A1
serial number : TT1151-00006
switch (config) #
Related Commands
Note
module-type
module-type <type> [force]
Splits or un-splits the interface, as desired.
Syntax Description type qsfp - Port runs at 40000/56000Mbps.
qsfp-split-2 - Port is split and runs at 2X10000Mbps.
qsfp-split-4 - Port is split and runs at 4X10000Mbps.
force force the split operation without asking for user confir-
mation.
Default interface module type is qsfp (if the interface supports 40Gbps speed)
Modes/Context Config interface ethernet
History 3.1.1400
Role admin