Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
309
Example
switch (config interface ethernet 1/4) # module-type qsfp-split-4
the following interfaces will be unmapped: 1/4 1/1
Type 'yes' to confirm split: yes
switch (config interface ethernet 1/4) #
Related Commands switchport mode
switchport [trunk | hybrid] allowed-vlan
show vlan
Note
• The affected interfaces should be disabled prior to the operation
• in order to un-split the interface - used the command with “qsfp”, the speed is set to
40Gbps “module-type qsfp”.
• This command is applicable only on 40Gbps Ethernet ports