Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
323
name
name <vlan-name>
no name
Adds VLAN name.
The no form of the command deletes the VLAN name.
Syntax Description
vlan-name
40-character long string.
Default No name available.
Modes/Context Config Vlan
History 3.1.1400
Role admin
Example
switch (config) # vlan 10
switch (config vlan 10) # name my-vlan-name
switch (config vlan 10) # show vlan
VLAN Name Ports
---- ----------- --------------------------------------
1 default Eth1/2, Eth1/3, Eth1/4/1, Eth1/4/2, Eth1/
5,
Eth1/6, Eth1/7, Eth1/8, Eth1/9, Eth1/10,
Eth1/11, Eth1/12, Eth1/13, Eth1/14, Eth1/
15,
Eth1/16, Eth1/17, Eth1/18, Eth1/19, Eth1/
20,
Eth1/21, Eth1/22, Eth1/23, Eth1/24, Eth1/
25,
Eth1/26, Eth1/27, Eth1/28, Eth1/29, Eth1/
30,
Eth1/31, Eth1/32, Eth1/33, Eth1/34, Eth1/
35,
Eth1/36, Po34, Po4096
10 my-vlan-name
Related Commands show vlan
switchport mode
switchport [trunk | hybrid] allowed-vlan
Note Name can not be added to a range of VLANs.