Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
332
show mac-address-table
show mac-address-table [address <mac-address> | interface ethernet <if-num-
ber> | vlan [<vlan> | range <range>] | unicast | multicast]
Displays the static and dynamic unicast and multicast MAC addresses for the switch.
Various of filter options available.
Syntax Description mac-address Filter the table to a specific MAC address.
if-number Filter the table to a specific interface.
vlan Filter the table to a specific VLAN number (1-4094).
range Filter the table to a range of VLANs.
unicast Filter the table to a unicast addresses only.
multicast Filter the table to a multicast addresses only.
Default N/A
Modes/Context Any Command Mode
History 3.1.0600
Role admin
Example
switch (config) # show mac-address-table
Switch ethernet-default
Vlan Mac Address Type Interface
---- ----------- ---- ------------
1 00:02:c9:06:97:36 dynamic Eth1/36
1 00:02:c9:10:d7:c0 static Eth1/35
Number of unicast: 2
Number of multicast: 0
switch (config) #
Related Commands mac-address-table static
clear mac-address-table
Note