Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
342
spanning-tree bpdufilter
spanning tree bpdufilter {disable | enable}
no spanning tree bpdufilter
Configures spanning-tree BPDU filter on the interface. The interface will ignore any
BPDU that it receives and will not send PDBUs, The STP state on the port will move
to the forwarding state.
The no form of the command returns the configuration to default.
Syntax Description disable Disables the BPDU filter on this port.
enable Enables the BPDU filter on this port.
Default BPDU filter is disabled.
Modes/Context Config interface ethernet
History 3.1.0000
Role admin
Example
switch (config) # interface ethernet 1/1
switch (config interface ethernet 1/1) # spanning-tree bpdufilter
enable
switch (config interface ethernet 1/1) #
Related Commands show spanning-tree
Note This command can be used when the switch is connected to hosts.