Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2

Mellanox Technologies

zeroconf

no zeroconf

Enables zeroconf on the specified interface. It randomly chooses a unique link-local

IPv4 address from the 169.254.0.0/16 block. This command is an alternative to

DHCP.

The no form of the command disables the use of zeroconf on the specified interface.

Syntax Description N/A

Default no zeroconf

Modes/Context Config Interface Management

History 3.1.0000

Role admin

Example

switch (config interface mgmt0) # zeroconf

switch (config) # show interfaces mgmt0 configured

Interface mgmt0 configuration

Enabled: yes

DHCP: no

Zeroconf: yes

IP address:

Netmask:

IPv6 enabled: yes

Autoconf enabled: no

Autoconf route: yes

Autoconf privacy: no

IPv6 addresses: 0

Speed: auto

Duplex: auto

MTU: 1500

Comment:

Related Commands show interfaces <ifname> configured

Note Enabling zeroconf disables DHCP and vice versa.