Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
360
lldp reinit
lldp reinit <seconds>
no lldp reinit
Sets the delay in seconds from enabling the LLDP on the port until re-initialization
will be attempted.
The no form of the command sets the parameter to default.
Syntax Description seconds 1-10
Default 2
Modes/Context Config
History 3.2.0300
Role admin
Example
switch (config)# lldp reinit 10
switch (config)#
Related Commands show lldp timers
Note