Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
39
ipv6 address
ipv6 address {<IPv6 address/netmask> | autoconfig [default | privacy]}
no ipv6 {<IPv6 address/netmask> | autoconfig [default | privacy]}
Configures IPv6 address and netmask to this interface, static or autoconfig options
are possible.
The no form of the command removes the given IPv6 address and netmask or dis-
ables the autoconfig options.
Syntax Description IPv6 address/netmask Configures a static IPv6 address and netmask.
Format example: 2001:db8:1234::5678/64.
autoconfig Enables IPv6 stateless address auto configuration
(SLAAC) for this interface. An address will be auto-
matically added to the interface based on an IPv6 prefix
learned from router advertisements, combined with an
interface identifier.
autoconfig default Enables default learning routes. The default route will
be discovered automatically, if the autoconfig is
enabled.
autoconfig privacy Uses privacy extensions for SLAAC to construct the
autoconfig address, if the autoconfig is enabled.
Default No IP address available, auto config is enabled
Modes/Context Config Interface Management
History 3.1.0000
Role admin