Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
394
Related Commands ip routing
vlan <vlan-id>
switchport mode
switchport access
show interfaces vlan
Note
• Make sure the VLAN was created, using the command “vlan <vlan-id>” in the global con-
figuration mode
• The VLAN must be assigned to one of the L2 interfaces. To do so, run the command
“swichport ...”
• At least one interface belong to that VLAN must be in UP state