Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
396
counters
counters
no counters
Enables counters gathering on the IP interface.
The no form of the command disables counters gathering on the IP interface.
Syntax Description N/A
Default counters are disabled.
Modes/Context Config vlan interface
History 3.2.0230
Role admin
Example
switch (config) # interface vlan 10
switch (config interface vlan 10) # counters
switch (config interface vlan 10) # show interfaces vlan 10
Vlan 10
Admin state: Enabled
Operational state: Down (no up member port)
Mac Address: 00:02:c9:5d:e0:f0
Internet Address: 0.0.0.0/0
Broadcast address: 255.255.255.255
MTU: 1522 bytes
Description: N/A
RX
0 Unicast frames
0 Multicast frames
0 Unicast octets
0 Multicast octets
0 Error frames
0 Error octets
TX
0 Unicast frames
0 Multicast frames
0 Unicast octets
0 Multicast octets
switch (config) #
Related Commands interface vlan
Note
• Enabling counters for the router interface adds delay to the traffic stream
• There are maximum of 16 counter sets