Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
402
4.1.2 Loopback Interface
Creates a loopback interface and enters the interface configuration mode.
The no form of the command deletes the interface.
id A numeric range of 1-32
N/A
Config
3.2.3000
admin
switch (config) # interface loopback 10
switch (config interface loopback 10) #
• Up to 32 loopback interfaces can be configured.
• Within the loopback configuration mode, you can configure description and ip-address.
• MTU cannot be configured on the loopback interface.
4.1.3
interface loopback
interface loopback <id>
no interface vlan <id>
Syntax Description
Default
Modes/Context
History
Role
Example
Related Commands
Note
show interfaces loopback
show interface loopback <id>
Shows the attribute of the interface loopback.
Syntax Description id A numeric range of 1-32
Default N/A
Modes/Context Config
History 3.2.3000
Role admin
Example
switch (config) # show interfaces loopback 2
Loopback 2
Internet Address: 2.2.2.2/32
Broadcast address: 2.2.2.2
MTU: 1500 bytes
Description: my-loopback
switch (config) #