Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2
Mellanox Technologies
57
2.1.5 DHCP
show ipv6 neighbors
show ipv6 neighbors [static]
Displays the Neighbor Discovery Protocol (NDP) table.
Syntax Description static Filters only the table of the static entries.
Default N/A
Modes/Context Config
History 3.1.0000
Role admin
Example
switch (config) # show ipv6 neighbors
IPv6 Address Age MAC Address State Interf
------------------------------------- ----- ----------------- ---------- ---
2001::2 9428 AA:AA:AA:AA:AA:AA permanent mgmt0
switch (config) #
Related Commands ipv6 neighbor
clear ipv6 neighbor
show ipv6
Note
ip dhcp
ip dhcp {default-gateway yield-to-static| hostname <hostname>| primary-intf
<ifname> | send-hostname }
no ip dhcp {default-gateway yield-to-static| hostname | | primary-intf | send-host-
name}
Sets global DHCP configuration.
The no form of the command deletes the DHCP configuration.