Mellanox MLNX-OS®Command Reference Guide for SX1018HP Ethernet Managed Blade Switch

Rev 1.6.2

Mellanox Technologies

2.4 Software Management

This chapter displays all the relevant commands used to manage the system software image.

image boot

image boot {location <location ID> | next}

Specifies the default location where the system should be booted from.

Syntax Description location ID Specifies the default destination location. There can be

up to 2 images on the system. The possible values are 1

or 2.

next Sets the boot location to be the next once after the one

currently booted from, thus avoiding a cycle through all

the available locations.

Default N/A

Modes/Context enable/config

History 3.1.0000

Role admin

Example

switch (config) # image boot location 2

switch (config) #

Related Commands show images

Note