SX1018HP Ethernet Managed Blade Switch User Guide for HP c-Class BladeSystems

SX1018HP Ethernet Managed Blade Switch HW User Manual Rev 1.0
Mellanox Technologies
11
port is split into 2 10Gb/s ports, then only SFP+ connectors #1 and #2 are used. Connectors #3
and #4 are left unconnected.
Figure 4: Breakout or Fanout Cable
Figure 5: Port Splitting Options
1.3.3 Mini USB
The mini USB in between uplink ports 9 and 10 is a debug port. This is for use by HP FAEs and
qualified service technicians only.
12 34 5 6 7 89 10 1112 1314 151617 18
This port is split-able into 4 10Gb/s SFP+ ports
This port is split-able into 2 10Gb/s SFP+ ports
This port is unmapped