SX1018HP Ethernet Managed Blade Switch User Guide for HP c-Class BladeSystems

SX1018HP Ethernet Managed Blade Switch HW User Manual Rev 1.0

Mellanox Technologies

5 Regulatory Compliance

The chapter lists all of the regulatory notices of compliance for the Mellanox SX1018HP Ether-

net Switch.

5.1 Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, this product has been

assigned a unique regulatory model number. The regulatory model number can be found on the

product nameplate label, along with all required approval markings and information. When

requesting compliance information for this product, always refer to this regulatory model num

ber. The regulatory model number is not the marketing name or model number of the product.

5.2 Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at personal expense.

5.3 Modifications

The FCC requires the user to be notified that any changes or modifications made to this device

that are not expressly approved by Hewlett-Packard Company may void the user’s authority to

operate the equipment.

5.4 Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector

hoods in order to maintain compliance with FCC Rules and Regulations.

5.5 Canadian notice

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

5.6 European Union regulatory notice

Products bearing the CE marking comply with the following EU Directives:

• Low Voltage Directive 2006/95/EC

• EMC Directive 2004/108/EC

• Ecodesign Directive 2009/125/EC, where applicable

CE compliance of this product is valid if powered with the correct CE-marked AC adapter pro-

vided by HP.