User Manual

Table 6-4 Potential values for W and X (continued)
W Jam location X Sensor or door
D Duplex area 3 Duplex refeed
D Duplex area A Door 1 (if different than the imaging area)
D Duplex area B Door 2 (if different than the imaging area)
D Duplex area F Multiple sensors or doors
E Output or intermediate paper transport unit (IPTU)
area
1 Output bin full sensor
E Output or intermediate paper transport unit (IPTU)
area
2 IPTU feed sensor 1
E Output or intermediate paper transport unit (IPTU)
area
3 IPTU sensor 2
E Output or intermediate paper transport unit (IPTU)
area
4 IPTU sensor 3
E Output or intermediate paper transport unit (IPTU)
area
5 IPTU bin full sensor 4
E Output or intermediate paper transport unit (IPTU)
area
6 Output sensor
E Output or intermediate paper transport unit (IPTU)
area
A Door 1
E Output or intermediate paper transport unit (IPTU)
area
F Multiple sensors or doors
F Multiple subsystems (occurs when paper is stuck in
several areas)
F Multiple sensors or doors
1 Jetlink input device 4 Tray 4 feed sensor
1 Jetlink Input device 5 Tray 5 feed sensor
1 Jetlink Input device 6 Tray 6 feed sensor
1 Jetlink Input device 7 Tray 7 feed sensor
1 Jetlink Input device 8 Tray 8 feed sensor
1 Jetlink Input device 9 Tray 9 feed sensor
1 Jetlink Input device A Door 1
1 Jetlink Input device B Door 2
1 Jetlink Input device F Multiple sensors or doors
2 Buffer pass unit 0 Buffer pass inlet sensor
2 Buffer pass unit 9 Buffer pass exit sensor
2 Buffer pass unit A Door 1
3 Page insert unit 0 Page insertion inlet sensor
3 Page insert unit 1 Page insertion tray 1 feed sensor
3 Page insert unit 2 Page insertion tray 2 feed sensor
3 Page insert unit 3 Page insertion tray 3 feed sensor
13.* errors 29