Specifications

2
Removal and Replacement Procedures
To service the server, you might need the following:
•
•
•
•
•
•
•
•
•
•
•
•
Torx T-15 screwdriver
Flat-blade screwdriver
Phillips screwdriver
Diagnostics software from the SmartStart CD
Safety Considerations
Before performing service procedures, review all the safety information.
Electrostatic Discharge Information
An electrostatic discharge (ESD) can damage static-sensitive devices or microcircuitry.
Proper packaging and grounding techniques are necessary precautions to prevent damage. To
prevent electrostatic damage, observe the following precautions:
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
stations.
Cover workstations with approved static-dissipating material. Use a wrist strap connected
to the work surface, and properly grounded (earthed) tools and equipment.
Keep work area free of nonconductive materials, such as ordinary plastic assembly aids
and foam packing.
Be sure that you are always properly grounded when touching a static-sensitive
component or assembly.
Avoid touching pins, leads, or circuitry.
Always place drives with the Printed Circuit Board (PCB) assembly-side down.
Use conductive field service tools.
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 2-1