Specifications

3
Diagnostic Tools
Automatic Server Recovery-2
ASR-2 is a feature that causes the system to restart when a catastrophic operating system
error occurs, such as a blue screen, ABEND (abnormal end), or panic. A system fail-safe
timer, the ASR-2 timer, starts when the System Management driver, also known as the Health
Driver, is loaded. When the operating system is functioning properly, the system periodically
resets the timer. However, when the operating system fails, the timer expires and restarts the
server.
ASR-2 increases server availability by restarting the server within a specified time after a
system hang or shutdown. At the same time, the Insight Manager 7 console notifies you by
sending a message to a designated pager number that ASR-2 has restarted the system. You
can disable ASR-2 from the Insight Manager 7 console or through RBSU.
Insight Manager 7
Insight Manager 7 is a Web-based application that allows system administrators to
accomplish normal administrative tasks from any remote location, using a Web browser.
Insight Manager 7 provides device management capabilities that consolidate and integrate
management data from HP and third-party devices.
For additional information, refer to the Management CD in the HP ProLiant Essentials
Foundation Pack.
Integrated ATA RAID Configuration Utility (ATA models only)
Supports and configures RAID arrays. The features include:
•
•
•
•
•
•
Optimized drive access
RAID support before operating system loads
Automatic detection and configuration
Ability to handle configuration changes
Support for PIO modes 0-4, MDMA modes 0-2, and Ultra DMA modes 0-5 (0-5 for
ATA/100)
Support for RAID levels 0, 1, and 1+0
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 3-1